The safest way to buy DeLonghi Magnifica Evo replacement parts is to match the exact ECAM29084SB model code first, then match the part number—not just the product name or photo. Current parts catalogs show genuine replacements for the water tank, infuser, grounds container, LatteCrema components and hot-water spout, but some parts have superseded or alternate numbers. That makes model and revision verification more important than assuming every “Magnifica Evo” part is interchangeable.
This guide is specifically for the U.S. De’Longhi Magnifica Evo with LatteCrema System ECAM29084SB. It is a parts-reference hub, not a repair manual. If you are still trying to identify which system has actually failed, start with the Magnifica Evo ECAM29084SB troubleshooting guide before ordering parts.
Do not order by appearance alone. De’Longhi has several ECAM29X Magnifica Evo variants, regional versions and revision codes. A water tank, carafe or spout can look almost identical while using a different fitting, lid, sensor or connector.
ECAM29084SB replacement parts: quick reference
| Part | Verified ECAM29084SB reference | Important note |
|---|---|---|
| Water tank assembly | AS00008027 | Current catalog reference; AS00002664 is an older/superseded equivalent seen in parts catalogs |
| Water filter | DLSC002 | Consumable filter, not a permanent machine component |
| Infuser / brew unit | 7313251451 | Genuine De’Longhi infuser listed for ECAM29084SB |
| Coffee grounds container | AS00002570 | Genuine container listed for ECAM29084SB |
| Hot-water spout | AS00002675 / AS00006949 | Both currently appear in genuine-parts catalogs as ECAM29084SB-compatible; verify revision before ordering |
| Milk carafe | AS00009731 / AS00009825 | Current catalogs show more than one compatible carafe reference; confirm the assembly and revision you need |
| Milk suction tube | AS00002606 | Genuine milk intake tube listed for ECAM29084SB |
| Carafe coupling | AS00006262 | Machine/carafe interface component listed for ECAM29084SB |
The table deliberately does not pretend every part has one timeless number. De’Longhi parts are superseded, renamed and revised. When two current catalogs disagree or show multiple compatible references, the safe move is to match your exact model/revision and the old part before buying.
How to confirm you really have an ECAM29084SB
Before spending money, check the rating label on the machine rather than relying on the front badge. The front says Magnifica Evo on several models. You want the full product code ECAM29084SB; some machines and parts databases may also show revision suffixes such as EX:1, EX:2 or S11.
- Match ECAM29084SB, not just “Magnifica Evo.”
- Keep the serial number and any EX/revision information available when ordering from a parts supplier.
- If replacing a removable component, compare the part number molded or printed on the original part whenever possible.
- If a seller lists only ECAM290, ECAM29X or “Magnifica Evo” without your exact model, treat compatibility as unconfirmed.
Water tank: AS00008027 / AS00002664
The current genuine water-tank assembly reference found for ECAM29084SB is AS00008027. Parts catalogs also cross-reference AS00002664 as an older or superseded number for the same Magnifica Evo tank family. This is exactly why searching only one number can make a valid replacement look unavailable.
A replacement tank makes sense when the original is cracked, the outlet area is damaged, it leaks after correct seating or the tank itself has been lost. It does not automatically fix water under the machine; leaks can also come from the tray, spout connection or internal hydraulic system. If the origin is unclear, use the Magnifica Evo leaking water guide before replacing the tank.
The Amazon tank above is a compatible replacement rather than a De’Longhi-branded OEM listing. Its listing specifically names ECAM29084SB. Retain your original lid if the replacement listing states that a lid is not included.
DLSC002 water filter
The DLSC002 is the correct De’Longhi water-softener/purifier filter for applicable ECAM machines including this Magnifica Evo. Unlike the tank or infuser, it is a consumable maintenance item and should be replaced rather than treated as a lifetime component.
If you need the preparation, de-airing, installation and menu-registration procedure, use the Magnifica Evo water filter replacement guide. This parts hub only identifies the correct filter.
Infuser / brew unit: 7313251451
The genuine brew unit listed for ECAM29084SB is 7313251451. This is one of the more useful part numbers to know because many De’Longhi infusers look similar in marketplace photos.
Do not replace the infuser simply because it will not come out. A brew unit that is stuck too high, too low or outside its removal position can be a positioning problem rather than a failed infuser. Follow the Magnifica Evo infuser stuck guide first. Replacement becomes more reasonable when the removable unit itself is cracked, distorted, has broken release hardware or cannot lock after the machine-side carriage position has been ruled out.
I would favor a genuine 7313251451 from a recognized De’Longhi parts supplier over a marketplace infuser that merely says “fits ECAM.” I have not added an Amazon button here because I could not verify a current U.S. Amazon listing tightly enough against ECAM29084SB to justify sending readers to it.
Coffee grounds container: AS00002570
The genuine AS00002570 coffee grounds container is currently listed as compatible with ECAM29084SB. Replace it if the original is cracked, warped, lost or physically cannot seat correctly after cleaning.
A replacement grounds container will not normally cure a persistent “empty grounds container” or container warning when the part is intact and correctly fitted. The machine also tracks container handling electronically, so first empty and reinstall the assembly exactly as the machine expects.
If the grounds container is physically intact but the machine still says it is full, missing or incorrectly inserted, troubleshoot the warning first with the Magnifica Evo grounds container light guide before ordering a replacement bin.
Hot-water spout: AS00002675 or AS00006949
The hot-water spout is a good example of a part where you should not memorize one number forever. Current genuine-parts sources list both AS00002675 and AS00006949 as hot-water spouts compatible with ECAM29084SB. That can reflect revisions or supersession, so match your machine revision and the seller’s compatibility data before ordering.
The Amazon option is an aftermarket compatible spout, not a genuine De’Longhi part. If your original spout is present but hot water has stopped, diagnose the tank, seating, air in the circuit and flow before replacing it. The full decision tree is in the Magnifica Evo hot water not working guide.
LatteCrema milk carafe: verify the exact assembly
The ECAM29084SB milk system is another area where current catalogs show multiple references. Genuine-parts databases currently list AS00009731 and AS00009825 as milk-carafe parts compatible with ECAM29084SB, while older references and substitutes also appear in parts channels. Do not choose between them on the number alone without checking whether the listing is the complete carafe, the reservoir/body or a superseded assembly.
The Amazon listing above is an aftermarket replacement and cross-references the ECAM290 Magnifica Evo family and AS00009731. Before replacing the whole carafe, remember that milk problems are often caused by residue, the suction tube, coupling or incorrect reassembly. Use the Magnifica Evo milk frother not working guide to identify the failed part first.
Milk suction tube: AS00002606
The genuine AS00002606 milk suction tube is listed specifically for ECAM29084SB. This is a much cheaper and more targeted replacement than buying a complete LatteCrema carafe when the only damaged piece is the intake tube.
- Replace the tube if it is split, hardened, permanently deformed or cannot seal at its fittings.
- Do not replace it merely because milk foam is weak before cleaning the milk path thoroughly.
- Compare the length, diameter and connector ends with the original part.
- If the tube looks intact but milk is not being drawn, inspect the wider carafe assembly and coupling.
Carafe coupling: AS00006262
The genuine AS00006262 carafe coupling is listed for ECAM29084SB. This part matters when the milk container itself is intact but the connection between the carafe and machine is damaged or no longer seals correctly.
Because the coupling sits at the machine/carafe interface, do not confuse a dirty connector with a broken connector. Clean owner-accessible milk-contact surfaces first. If the plastic fitting is cracked, loose or visibly damaged, use the exact part reference rather than a generic connector.
What about the drip tray and tray grille?
The drip-tray system contains more than one physical piece: tray body, grille, float/level indicator and surrounding trim can be cataloged separately. I would not publish one universal ECAM29084SB tray number without tying it to the exact revision and diagram position, because that creates the kind of “looks right but does not fit” purchase this guide is meant to prevent.
If your tray is cracked or missing, use a genuine-parts model lookup for ECAM29084SB, then confirm the diagram position and revision before ordering. If the tray is intact but fills unusually quickly, the tray may be collecting water from another problem rather than causing it.
O-rings, gaskets and seals: do not buy a random kit
Parts catalogs list several O-rings and gaskets for ECAM29084SB. That does not mean one generic “DeLonghi O-ring kit” is automatically correct for every leak. Diameter, thickness, material and exact location matter.
- Identify where the seal is installed before ordering it.
- Use the exploded diagram or manufacturer part number when possible.
- Do not install a thicker seal simply because the old joint leaks.
- Do not lubricate every O-ring with an unspecified household grease.
- Internal high-temperature or pressure-side seals are better left to service unless the repair documentation clearly treats them as user-serviceable.
Which parts are reasonable for an owner to replace?
| Part | Owner replacement? | Why |
|---|---|---|
| Water tank | Yes | Designed to be removed every day |
| DLSC002 filter | Yes | Routine consumable |
| Grounds container | Yes | Normal removable component |
| Hot-water spout | Yes | Normal removable accessory |
| LatteCrema carafe / suction tube | Yes | Normal removable milk-system components |
| Infuser | Yes, if the removable unit itself is confirmed damaged | Designed for owner removal and cleaning |
| External tray pieces | Usually | Removable and non-electrical, but verify exact part |
| Pump, solenoid valves, wiring, control board, heater | No for routine owner repair | Internal electrical, hot-water and pressure systems |
Internal parts exist—but that does not make them DIY parts
OEM catalogs for ECAM29084SB go far beyond the removable parts in this guide. They list pumps, valves, flowmeters, sensors, tubing, wiring, belts, connectors and control components. Availability is not the same as owner serviceability.
If diagnosing the repair requires opening the outer housing and working around mains voltage, a heater, pressurized water or internal wiring, the safer approach is to use the exact model and symptom when contacting De’Longhi or an experienced service center. A $10 internal part can become an expensive guess if the failed component was never actually diagnosed.
Genuine vs compatible Magnifica Evo parts
There is nothing inherently wrong with an aftermarket tank, spout or milk container when the fit is explicitly verified for ECAM29084SB. The important distinction is to label it honestly and apply a higher standard to parts that control sealing, water flow or mechanical alignment.
| Choose genuine/OEM when… | A compatible part can make sense when… |
|---|---|
| The part has several near-identical revisions | The seller explicitly lists ECAM29084SB |
| Fit controls a critical seal or mechanical position | It is a simple removable container or accessory |
| The OEM part is still reasonably available | The OEM part is unavailable or disproportionately expensive |
| You are replacing the infuser or a precise coupling | The listing provides the exact cross-reference and clear return policy |
For marketplace purchases, save the listing screenshot or part description until you have confirmed fit. Compatibility text can change, and returning a part is easier when you can show exactly what the seller claimed.
Five checks before ordering any ECAM29084SB part
- Confirm the machine model. It must say ECAM29084SB, not merely Magnifica Evo.
- Check the revision. Record any EX/S11 information from the rating label or parts database.
- Identify the failed component. Do not replace a tank because the symptom is “no water” unless the tank itself is actually at fault.
- Match the part number. Use the original part, model diagram and current supersession information.
- Read what is included. A tank may exclude its lid; a milk-container listing may exclude the lid or frothing head; a compatible part may be one component rather than the full assembly.
Magnifica Evo replacement parts FAQs
What is the water tank part number for ECAM29084SB?
The current genuine water-tank assembly reference is AS00008027. Parts catalogs also cross-reference AS00002664 as the older/superseded number for this Magnifica Evo tank family.
What infuser fits the DeLonghi Magnifica Evo ECAM29084SB?
The genuine infuser listed for ECAM29084SB is 7313251451. Verify the machine-side positioning problem is not the real cause before replacing an infuser that simply will not come out.
What grounds container fits ECAM29084SB?
The genuine coffee grounds container currently listed for ECAM29084SB is AS00002570.
What hot-water spout fits ECAM29084SB?
Current genuine-parts catalogs show AS00002675 and AS00006949 as ECAM29084SB-compatible hot-water spout references. Verify the revision or supersession information before ordering rather than assuming the two numbers are interchangeable in every production run.
What milk carafe fits the ECAM29084SB?
Current parts catalogs show more than one ECAM29084SB-compatible milk-carafe reference, including AS00009731 and AS00009825. Confirm whether you need the complete assembly, reservoir/body or a revised/superseded carafe before buying.
Can I use generic Magnifica Evo replacement parts?
Only when the seller explicitly confirms ECAM29084SB compatibility and the physical part matches the required fitting and function. “Magnifica Evo compatible” is too broad by itself because the family contains multiple configurations and revisions.
Where should I buy genuine DeLonghi parts?
Use a recognized De’Longhi parts distributor or a parts catalog that lets you search the exact ECAM29084SB model and check compatibility against the manufacturer part number. Marketplace listings are useful for simple compatible accessories, but they should not replace model-number verification.
Buy the failed part, not the symptom
The most useful ECAM29084SB part number is the one tied to a component you have actually confirmed is damaged. Start with the exact machine model, diagnose the symptom, then match the current or superseded part number. That approach prevents the two most common parts mistakes: buying a component from the wrong Magnifica Evo variant and replacing a perfectly good part because another system caused the same symptom.